Bio-Green 1 Grow
- Visibly improves the condition of the plant’s roots
- Sufficient potassium for the start of the bloom and robustness of the plant
- Sufficient phosphorus for explosive root growth
- Sufficient magnesium for optimal chlorophyll and protein synthesis
- Consists only of the purest raw materials.
- BioGreen Bio 1 is completely biological
- No best-before date
In a developing crop, nitrogen and phosphorus are very important during the first vegetative stage. The phosphate shortage has a negative effect on root development, resistance, and yield of the crop. A crop in nutrient-deficient soil, or in which the soil (substrate) requires the proper nutrients for the roots needs an earlier use of Bio 1.
Biogreen’s Bio 1 Grow Growing Fertilizer ensures all those nutrients needed for the production of strong and healthy plants.
Bio 1 is used during the first stage of growth and up to week 2. It should be administered twice during irrigation and then irrigated without nutrition (rinsing). Use the dose indicated in the instructions. Too much fertilization can lead to stagnant growth.
From the 2nd day of growth to the 3rd or 4th week of the bloom, depending on the top size, give in gradually increasing doses. If the soil is nutrient-rich, give this mixture 1 to 3x per week. Give daily if the soil is nutrient-poor or if you use hydroponic growth methods. Water every day as needed. Be careful not to overdose.
Conversions: 1 Teaspoon = 5mL | 1 Tablespoon = 15 mL | 1 Ounce = 30mL | 1 Cup = 240 mL
Using nutrients for hydroponics
Nutrients are the basis of any hydroponic system and since we need to meet all of the plants’ nutritional requirements, it’s important to know what you are supplying and what can go wrong. With any nutrient solution the two factors to keep in mind are firstly the composition of your nutrient – does it contain all of the elements required for plant growth in the correct ratios. And secondly, with your balanced and complete nutrient solution, what strength or ‘EC’ should it be running at for your particular crop, stage of growth and type of hydroponic system, and how do we measure this.
The nutrient solution – composition
Many growers prefer to buy a ‘pre-mixed’ nutrient solution which simply needs to be diluted (for liquid concentrates) or dissolved in water before use. Often these ‘pre-made’ nutrients come in 2, 3, 4 or even more ‘parts’ so a grower can change the ratio of the mineral elements to allow for either vegetative or fruiting growth or for different crops. There are many excellent brands of these pre-mixed nutrients on the market, however, many growers have come across major problems when they try to use some of the ‘indoor plant food’ or other nutrients which have been designed for plants growing in soil or a pre-fertilized potting mix. Often these types of products are not suitable for hydroponics because they are not designed to be a ‘complete plant food’. It is always preferable to buy a nutrient mix that is sold especially for ‘hydroponic’ use and is ‘complete’ plant food. To be ‘complete’ a hydroponic nutrient needs to have the essential elements for plant growth these are:
- Nitrogen (N)
- Potassium (K)
- Phosphorus (P)
- Calcium (Ca)
- Magnesium (Mg)
- Sulphur (S)
- Iron (Fe)
- Manganese (Mn)
- Copper (Cu)
- Zinc (Zn)
- Molybdate (Mo)
- Boron (B)
- Chlorine (Cl)
The levels that these elements are present in your hydroponic nutrient tend to vary between brands since there is no one single recommendation for concentrations. Many nutrients may also contain some of the ‘beneficial elements’ such as Nickel (Ni), Cobalt (Co), Silica (Si) or Selenium (Se). While these are not ‘essential’ (plants will still grow without them), they can be beneficial to many crops.
Whether you make your own nutrient solution from the different fertilizer salts or buy a pre-made brand, problems can, an often do, arise with deficiencies of one or more of the nutrient elements. Common reasons for this are that (1) the nutrient strength may be too low, resulting in insufficient nutrients for the plants in general. (2) The nutrient formula you are using may not be completely balanced, and one (or more of the elements) may be deficient. (3) Occasionally, growers may unintentionally leave out one of the fertilizer salts or the wrong fertilizer was used when the nutrient formula was weighted out. And just to complicate matters further, even if your solution is well balanced, sometimes environmental and internal plant conditions prevent the uptake of certain nutrients and deficiency symptoms then result.
Signs of Deficiency
Each of the mineral elements required by the plant has its own set of ‘deficiency signs and symptoms’ and growers can learn to identify many of these. Many of the signs are similar in appearance, but others are very distinct and most good gardening and hydroponic books will detail what these signs are. Briefly, the deficient symptoms for each of the elements are listed below (these may vary slightly between different plant species and depending on how severe the deficiency is):
Nitrogen (N): Plants are short, leaves tend to be pale green-yellow in colour, especially on the older foliage. On tomato plants, the undersides of the leaf and stems can develop a purple colouration.
Phosphorus (P): Plants are usually stunted, and a dark green colour. Symptoms occur on the older leaves first and plant maturity is often delayed. Phosphorus deficiency in some plant species can be due to conditions being too cold for the uptake of this element, rather than a lack of phosphorus in the nutrient solution.
Potassium (K): The older leaves become yellowed with scattered dark (brown or black) spots, followed by tissue death. A severe deficiency will stunt the plant and all foliage will become yellowed and curled. On lettuce, the leaves may take on a yellowed, bronzed appearance starting on the older foliage.
Sulfur: Deficiency of sulfur is not common – there may be a yellowing of the leaves, first seen on the new growth.
Magnesium: Deficiency is common on tomato crops with the older leaves developing yellowed areas between the veins which stay green.
Calcium: Young leaves are affected before older leaves and become distorted, small in size with spotted or necrotic (dead) areas. Bud development is inhibited and root tips may die back. Tip burn on lettuce is a symptom of calcium deficiency but is also caused by other factors not associated with a solution deficiency. Blossom end rot of tomatoes is also caused by a deficiency of calcium within the fruit tissue (not necessary in the nutrient solution) and is more of a ‘calcium transport’ problem within the plant under certain environmental conditions.
Iron: Deficiency shows as a distinct yellowing between the leaf veins which stay green, on the new growth and younger leaves (this distinguishes it from magnesium deficiency which shows first on the older leaves). On crops such as tomatoes, iron deficiency may show when conditions are too cold for uptake, rather than be caused by an actual deficiency in solution.
Chlorine: deficiency shows as wilted leaves which then become yellowed and necrotic, eventually turning a bronze colour.
Manganese: Initially, an interveinal yellowing on the younger or older leaves, depending on the plant types. Brown, dry areas may develop and leaves may drop.
Boron: Plant size is usually reduced, the growing point may die back. Root tips often become swollen and discolored. Leaves eventually become thickened, brittle, and maybe curled with yellow spotting.
Zinc: Short plants with a reduction in internode length and leaf size. Leaf edges may be distorted or puckered, Yellowing between the leaf veins may also develop.
Copper: Deficiency is rare, but young leaves may become dark green and twisted or misshapen, often with brown, dry spots.
Molybdenum: Older leaves develop interveinal yellowing, progressing to the younger leaves. Leaf edges may develop scorching or cupping of the leaves.
Solution strength – under and overuse, measurement
Provided the nutrient you are using is complete and balanced, the concentration or strength of the solution has major effects on plant growth and development. This is why it is essential to be able to measure solution concentration, using a meaningful unit of measure. Many growers will still be working in ppm, using TDS meters, however, there is now an industry move to standardize the unit of solution measurement to EC (electrical conductivity) which is a more accurate and meaningful way to monitor your nutrient. All a TDS or ppm meter actually does is to measure the EC of the solution, then use an approximate conversion figure to convert this to PPM. The problem arises is that this conversion figure is never very accurate, as different nutrient solutions with different compositions of nutrient elements will have different PPM values so using one conversion figure can be extremely inaccurate. What the plants’ root system is actually responding to is the EC (or osmotic concentration) of the nutrient so this is what we should measure. There are a number of different EC (sometimes called CF) meters, and the ‘water-resistant’ pen-type meters are commonly used by growers. Depending on where in the world you are, the units expressed on your meter may be different, however, it is easy to convert between the different units of EC.
“Perfect for my plants- they were feeling a tad sorry for themselves after not having much care for a few year due to illness. This seems to be perking them up a bit in this hot weather with the extra help!”
“Yes it dose seem to work,and no trip down the garden center,door to door.What more do you want!”
“ Made a huge difference to our “hanging baskets” this year, really noticable“
Bio Green USA is the manufacturer of environmentally responsible fertilizers. Each Bio Green product is designed specifically for the growing demands of turf, shrubs, trees and agriculture crops. Bio Green fertilizers feed plants systemically, making nutrients immediately available to plants through both roots and foliage when applied. Bio Green feeds aerobic bacteria as well as other living organisms in the soil to help build soil fertility. Aerobic bacteria are involved in a process called the nitrogen cycle. This cycle uses the bacteria to convert nitrogen gas into a form that is useable by plants. The bacteria combined with other living organisms will also convert the organic material left behind from the plants into new topsoil. Our products have been used to help alleviate problems including Soil pH, Low Organic Matter Content, Compaction, Drought & Heat Stress, High Soil Salinity, Low Nutrient Availability, & Shallow Root Development. Bio Green® is a complete nutrient fertilizer. This means that it contains or makes available through natural processes, the widely known macronutrients; Nitrogen, Phosphorous, and Potassium. Bio Green® also contains the micronutrients which are essential for plant growth. Our complete formulas ensure that plants get all that is needed to thrive during the growing season and soil organisms get all that is needed to build and maintain healthy topsoil. Bio Green USA is the Licensor of the Bio Green® Lawn Service brand business model for license and co-branding opportunities for individually-owned and operated lawn and landscape service companies located in the U.S. Bio Green® Fertilization Redefined.™ Bio Green USA and its subsidiary company Greene County Fertilizer Company operate in their manufacturing plant/corporate headquarters located in Greensboro, GA.