FoxFarm Tiger Bloom
- Use Tiger Bloom at the first sign of flowering
- To extend flowering or fruiting; add Big Bloom liquid fertilizer late in the season
- Formulated with a low pH to maintain stability in storage and keep micronutrients available
- FoxFarm quality and trusted product
- UK stock, fast delivery
FoxFarm Tiger Bloom (2-8-4) is an ultra potent, fast acting, high phosphorus fertilizer that also contains a good supply of nitrogen for growth and vigour. It is formulated with a low pH to maintain stability in storage and keep micronutrients available. Tiger Bloom can be used for both hydroponic and soil applications. When used as directed Tiger Bloom encourages abundant fruit, flower, and multiple bud development.
Use Tiger Bloom at the first sign of flowering at the rate of 2-3 teaspoons per gallon of water. It can also be used as a foliar fertilizer; just apply it to both sides of leaves early in the morning. To extend flowering or fruiting, add our Big Bloom liquid fertilizer late in the season.
For Best Results: Raise the pH to the desired level of between 5.8 and 6.3. Add a pH up adjuster. For hydroponic systems use a conductivity or ppm meter to monitor water quality and control nutrient strength. This will ensure maximum delivery of nutrients.
General Purpose Feeding: 2-3 teaspoons per gallon
Recirculating Systems: 2-3 teaspoons per gallon
Heavy Feeding: 4 teaspoons per gallon
Foliar Feeding: ½ teaspoon per gallon. Use a pump sprayer and apply to both sides of leaves. Early mornings are best. To enhance fragrance, oil production, and flavour of plants that are close to harvest, use FoxFarm Big Bloom “all natural” liquid plant food concentrate in combination with Tiger Bloom.
Conversions: 1 Teaspoon = 5mL | 1 Tablespoon = 15 mL | 1 Ounce = 30mL | 1 Cup = 240 mL
Nutrients are the basis of any hydroponic system and since we need to meet all of the plants’ nutritional requirements, it’s important to know what you are supplying and what can go wrong. With any nutrient solution the two factors to keep in mind are firstly the composition of your nutrient – does it contain all of the elements required for plant growth in the correct ratios. And secondly, with your balanced and complete nutrient solution, what strength or ‘EC’ should it be running at for your particular crop, stage of growth and type of hydroponic system, and how do we measure this.
The nutrient solution – composition
Many growers prefer to buy a ‘pre-mixed’ nutrient solution which simply needs to be diluted (for liquid concentrates) or dissolved in water before use. Often these ‘pre-made’ nutrients come in 2, 3, 4 or even more ‘parts’ so a grower can change the ratio of the mineral elements to allow for either vegetative or fruiting growth or for different crops. There are many excellent brands of these pre-mixed nutrients on the market, however, many growers have come across major problems when they try to use some of the ‘indoor plant food’ or other nutrients which have been designed for plants growing in soil or a pre-fertilized potting mix. Often these types of products are not suitable for hydroponics because they are not designed to be a ‘complete plant food’. It is always preferable to buy a nutrient mix which is sold especially for ‘hydroponic’ use and is ‘complete’ plant food. To be ‘complete’ a hydroponic nutrient needs to have the essential elements for plant growth these are:
The levels that these elements are present in your hydroponic nutrient tend to vary between brands since there is no one single recommendation for concentrations. Many nutrients may also contain some of the ‘beneficial elements’ such as Nickel (Ni), Cobalt (Co), Silica (Si) or Selenium (Se). While these are not ‘essential’ (plants will still grow without them), they can be beneficial to many crops.
Whether you make your own nutrient solution from the different fertilizer salts or buy a pre-made brand, problems can, an often do, arise with deficiencies of one or more of the nutrient elements. Common reasons for this are that (1) the nutrient strength may be too low, resulting in insufficient nutrients for the plants in general. (2) The nutrient formula you are using may not be completely balanced, and one (or more of the elements) may be deficient. (3) Occasionally, growers may unintentionally leave out one of the fertilizer salts or the wrong fertilizer was used when the nutrient formula was weighted out. And just to complicate matters further, even if your solution is well balanced, sometimes environmental and internal plant conditions prevent the uptake of certain nutrients and deficiency symptoms then result.
Signs of Deficiency
Each of the mineral elements required by the plant has its own set of ‘deficiency signs and symptoms’ and growers can learn to identify many of these. Many of the signs are similar in appearance, but others are very distinct and most good gardening and hydroponic books will detail what these signs are. Briefly, the deficient symptoms for each of the elements are listed below (these may vary slightly between different plant species and depending on how severe the deficiency is):
Nitrogen (N): Plants are short, leaves tend to be pale green-yellow in colour, especially on the older foliage. On tomato plants, the undersides of the leaf and stems can develop a purple colouration.
Phosphorus (P): Plants are usually stunted, and a dark green colour. Symptoms occur on the older leaves first and plant maturity is often delayed. Phosphorus deficiency in some plant species can be due to conditions being too cold for uptake of this element, rather than a lack of phosphorus in the nutrient solution.
Potassium (K): The older leaves become yellowed with scattered dark (brown or black) spots, followed by tissue death. Severe deficiency will stunt the plant and all foliage will become yellowed and curled. On lettuce, the leaves may take on a yellowed, bronzed appearance starting on the older foliage.
Sulfur: Deficiency of sulfur is not common – there may be a yellowing of the leaves, first seen on the new growth.
Magnesium: Deficiency is common on tomato crops with the older leaves developing yellowed areas between the veins which stay green.
Calcium: Young leaves are affected before older leaves and become distorted, small in size with spotted or necrotic (dead) areas. Bud development is inhibited and root tips may die back. Tip burn on lettuce is a symptom of calcium deficiency but is also caused by other factors not associated with a solution deficiency. Blossom end rot of tomatoes is also caused by a deficiency of calcium within the fruit tissue (not necessary in the nutrient solution), and is more of a ‘calcium transport’ problem within the plant under certain environmental conditions.
Iron: Deficiency shows as a distinct yellowing between the leaf veins which stay green, on the new growth and younger leaves (this distinguishes it from magnesium deficiency which shows first on the older leaves). On crops such as tomatoes, iron deficiency may show when conditions are too cold for uptake, rather than be caused by an actual deficiency in solution.
Chlorine: deficiency shows as wilted leaves which then become yellowed and necrotic, eventually turning a bronze colour.Roots become stunted and thickened near the tips.
Manganese: Initially, an interveinal yellowing on the younger or older leaves, depending on the plant types. Brown, dry areas may develop and leaves may drop.
Boron: Plant size is usually reduced, the growing point may die back. Root tips often become swollen and discoloured. Leaves eventually become thickened, brittle, and may be curled with yellow spotting.
Zinc: Short plants with a reduction in internode length and leaf size. Leaf edges may be distorted or puckered, Yellowing between the leaf veins may also develop.
Copper: Deficiency is rare, but young leaves may become dark green and twisted or misshapen, often with brown, dry spots.
Molybdenum: Older leaves develop interveinal yellowing, progressing to the younger leaves. Leaf edges may develop scorching or cupping of the leaves.
Solution strength – under and overuse, measurement
Provided the nutrient you are using is complete and balanced, the concentration or strength of the solution has major effects on plant growth and development. This is why it is essential to be able to measure solution concentration, using a meaningful unit of measure. Many growers will still be working in ppm, using TDS meters, however, there is now an industry move to standardize the unit of solution measurement to EC (electrical conductivity) which is a more accurate and meaningful way to monitor your nutrient. All a TDS or ppm meter actually does is to measure the EC of the solution, then use an approximate conversion figure to convert this to PPM. The problem arises is that this conversion figure is never very accurate, as different nutrient solutions with different compositions of nutrient elements will have different PPM values so using one conversion figure can be extremely inaccurate. What the plants’ root system is actually responding to is the EC (or osmotic concentration) of the nutrient so this is what we should measure. There are a number of different EC (sometimes called CF) meters, and the ‘water resistant’ pen type meters are commonly used by growers. Depending on where in the world you are, the units expressed on your meter may be different, however, it is easy to convert between the different units of EC.
We have a wide selection of nutrients and EC meters on our site.
“his product has a great price compared to others that I have seen. Unfortunately I did not get to use much of it. I used it to jump start jalapeño and bell pepper seedlings and I ended up doing an aquaponics system from an old 55 gallon fish tank instead. Although I already spent my money on this product I decided to go the aquaponics route that way no “artificial” fertilizers are added. Plus all I have to buy is fish food-no chemicals. On another note: i did see some reviews about others getting theirs with no seals on the bottle. I noticed that when I opened one of mine up the seal stayed attached to the lid and if you look carefully you can tell that there is a seal in there.
“I’m sorry I could only give this product 5 stars. I could actually HEAR my garden grow. Every morning I woke up and could really see that things had grown. I live in the northern midwest and we have a very short growing season. This really jump started everything. All my veggies are HUGE, and taste great. I am ordering this by the gallon for next year.”
“I purchased my first Fox Farm liquid fertilizer at a nursery in my area. It was expensive compared to other products used for gardening. Living in Las Vegas NV, the desert soil lack lots nutrients. In my garden I grow, tomatoes onions, peppers, and just started corn. I have apple, pear, and lemon trees. They produce fruit, but not like I think they could. After purchasing FoxFarm Tiger Bloom, I noticed a difference in the appearance of the plants and trees.. I wasn’t sure if the reason was FoxFarm Tiger Bloom. I decided to go to Amazon a purchase the set of all three that’s mentioned above. I love the results at this point. My plants appear stronger and more vibrant. The cost is expensive but if you use the product according to the pamphlet enclosed this will last a long time. You won’t need to purchase anymore plant food. I also use this product on my house plants which are looking better everyday.“
We Are FoxFarm Soil & Fertilizer Company
FoxFarm is passionate about producing the finest soil mixes, fertilizers, and micro-brewed liquid plant foods. Our formulas are greenhouse tested to ensure quality and consistency. FoxFarm takes great pride in delivering uncompromising quality and supreme customer service. We have supplied this consistency to our customers since 1991.
Home Grown In Humboldt County
The strength of our success and growth represents career opportunities that nurture and develop our local economy. FoxFarm proudly contributes annually to many local scholarships, community events, and local organizations. After all, Humboldt County is Our Home.
OUR COMMUNITY, OUR PRODUCTS, OUR PLANET
Our formulas are blended in small batches and rigorously tested to ensure the highest quality standards. Each of us is passionate about producing the finest handcrafted natural and organic soil mixes and fertilizers available anywhere. We do this together: Our production crew, management team, office staff, biologists, sales force, and the truck drivers who carry us to market. At FoxFarm we are dedicated to making a difference in how we treat the Earth and each other. FoxFarm products are formulated to replenish the soil, lift the human spirit and beautify the Earth, naturally. Using FoxFarm soils and fertilizers is a conscious choice to improve the environmental health of the garden; that’s good for the soil, our families and for future generations to come.