Global Air Supplies Enivro Controller V2
- Controls AC & EC fans
- Controls & regulates temperature and humidity in your grow room
- Day and night settings
- Dump feature for closed-loop environments
- LCD display
- 2 programmable sockets that can control other grow room equipment
- Simple navigation and set up
- Control humidifiers, dehumidifiers, heaters, lights and timers all from one controller
- For grow lights don’t exceed 1200 watts (2×600 watt lights)
- AC fans to a maximum of 2200 watts
- Built-in fan balancer to run both outtake and intake fans
- Max 13 Amp total
- Dimensions 20x9cm
- 1.2 metre power lead
- 3.8 metre probe length
- Works perfectly with Systemair Revolution AC & EC fans
The Enviro Controller V2 takes care of fan speeds for both AC and EC fans – and not only that, it can also regulate ‘on’ and ‘off’ times for practically any piece of equipment in your grow room! Lights (up to 1200w), heaters, humidifiers, and even pumps, can be controlled using data gathered from the environment. This simplifies your set-up, making it easy to maintain a perfect environment from a single point. With the V2, it gives you new features such as minimum and maximum day and night fan speed settings for enhanced control over your environment, the ability to calibrate your temperature and humidity sensors, automatic dimming function on the LEDs and new green LED lights which won’t disturb your plants cycle.
20cm x 9cmMax Amp:
13 Amp totalPower Lead Length:
1.2 metresProbe Length:
How the Enviro Controller V2 Works
Controlling your fan speed can be critical to the success of your indoor garden. When cold outdoor temperatures hit, it’s handy to be able to reduce air intake flow a little, allowing your grow lights and heaters to compensate. The same can be said for hot summer months, when outside temperatures play havoc with your indoor environment. In this case, turning fans up helps to keep air temperatures optimal. The Enviro Controller V2 controls temperature and humidity levels using its thermostat and humidity sensor (which are now able to be calibrated). The Enviro Controller V2 can regulate either AC fans or EC fans, keeping your grow room parameters in check at all times.
The Enviro Controller V2 has an easy-to-program operating system, from which you can govern every aspect of your grow room’s environment, including lights (up to 2 x 600w), heaters, humidifiers, dehumidifiers, and even pumps – practically anything that needs to be switched ‘on’ and ‘off’ that doesn’t exceed the total 13 amp rating. Just plug your equipment into the two ‘exit’ plug sockets. These sockets are fully programmable, using information gathered by the probes to switch equipment on when it’s needed.
Here’s a quick rundown of what the exit sockets can do:
Heaters – these can be set to come on when temperatures drop below certain levels. Unlike a typical thermostatic set-up, you can select different temps for daytime and nighttime!
Humidifiers – set your humidifiers to come on whenever moisture levels drop below your chosen levels. Again, this can be set differently for daytime and nighttime.
Dehumidifiers – works in the same way as for humidifiers, but in the opposite fashion, switching equipment on as moisture levels rise above your selected daytime or nighttime settings.
Timer – you can control any growroom equipment (as long as you don’t exceed 13-amp) down to the second! So you can switch everything from your grow lights (up to 2 x 600w) to your grow system pumps.
“So far so good. Works, price is reasonable, data tracking is nice feature. Unfortunately there is lights that do not go off in dark. I had to run it on a timer to shut off at dark. I don’t understand why you would put lights on a device designed for a flowering room? Wish I could see the data for my “lights off” cycle. 4 stars for now.”
“This is the best monitor for the low price. Has features that controllers twice the price don’t have. This is not a timed co2 release controller.”
“This is an amazing device and works exactly as intended. I would totally buy this again.”
About Global Air Supplies
Global Air Supplies is the first and only horticultural wholesaler that specialise in ventilation products. We work in partnership with manufacturers to create the best products for your grow room. We sell on fact not fiction. All our products have been tested in independent laboratories so you can believe in our products and our data, to help you get the grow environment to meet your needs.
We are now partners with Systemair and the new distributor of Systemair products. Systemair, the global leader in ventilation products, wanted us, a dedicated expert team to represent them in our industry.